--- header unit 0: primary ---
SIMPLE = T / Written by IDL: Thu May 9 14:29:40 2019
BITPIX = -64 / IEEE double precision floating point
NAXIS = 2 / number of data axes
NAXIS1 = 256 / Number of positions along axis 1
NAXIS2 = 256 / Number of positions along axis 2
EXTEND = T / FITS dataset may contain extensions
COMMENT FITS (Flexible Image Transport System) format is defined in 'Astronomy
COMMENT and Astrophysics', volume 376, page 359; bibcode: 2001A&A...376..359H
DATE = '2019-01-08T09:45:40' / file creation date (YYYY-MM-DDThh:mm:ss UT)
EXTNAME = 'IFRAME.IMAGE' / Extension name
CTYPE1 = 'RA---TAN' / pixel coordinate system
CTYPE2 = 'DEC--TAN' / pixel coordinate system
CRPIX1 = 512. / Ref pixel in X
CRPIX2 = 512. / Ref pixel in Y
CRVAL1 = 116.56796 / 07:46:00.27, RA at ref pixel
CRVAL2 = 15.34725 / 15:20:00.8, DEC at ref pixel
CD1_1 = -1.00833333333333E-06 / Transformation matrix element
CD2_1 = 0. / Transformation matrix element
CD1_2 = 0. / Transformation matrix element
CD2_2 = 1.00833333333333E-06 / Transformation matrix element
INHERIT = T / Denotes the INHERIT keyword convention
CUNIT1 = 'deg' / unit of pixel step
CUNIT2 = 'deg' / unit of pixel step
ORIGIN = 'ESO-PARANAL' / European Southern Observatory
TELESCOP = 'ESO-VLT-U3' / ESO <TEL>
INSTRUME = 'SPHERE' / Instrument used.
OBJECT = '704 Interamnia' / Original target.
RA = 116.56796 / [deg] 07:46:16.3 RA (J2000) pointing
DEC = 15.34725 / [deg] 15:20:50.1 DEC (J2000) pointing
EQUINOX = 2000. / Standard FK5
RADECSYS = 'FK5' / Coordinate system
MJD-OBS = 58491.13383736 / Obs start
DATE-OBS = '2019-01-08T03:12:43.547' / Observing date
UTC = 11563. / [s] 03:12:43.000 UTC
LST = 20439.058 / [s] 05:40:39.058 LST
PI-COI = 'UNKNOWN' / PI-COI name.
OBSERVER = 'UNKNOWN' / Name of observer.
ARCFILE = 'SPHER.2019-01-08T03:12:43.548.fits' / Archive File Name
DATAMD5 = 'db72cb85a0d0923ba2e3567f8c3e4796' / MD5 checksum
PIPEFILE = 'zpl_science_imaging_cam2.fits' / Filename of data product
HIERARCH ESO OBS AIRM = 2. / Req. max. airmass
HIERARCH ESO OBS AMBI FWHM = 0.8 / Req. max. seeing
HIERARCH ESO OBS AMBI TRANS = '2CLR' / Req. sky transparency
HIERARCH ESO OBS ATM = 'DATM' / Req. Atmospheric Turbulence Model
HIERARCH ESO OBS CONTAINER ID = -999 / Scheduling container ID
HIERARCH ESO OBS CONTAINER TYPE = 'U' / Scheduling container type
HIERARCH ESO OBS CONTRAST = 0. / Req. contrast
HIERARCH ESO OBS DID = 'ESO-VLT-DIC.OBS-2.0' / OBS Dictionary
HIERARCH ESO OBS EXECTIME = 1392 / Expected execution time
HIERARCH ESO OBS GRP = '0' / linked blocks
HIERARCH ESO OBS ID = 2064166 / Observation block ID
HIERARCH ESO OBS MOON DIST = 30 / Req. min. angular dist. from moon [deg]
HIERARCH ESO OBS MOON FLI = 1. / Req. max. fractional lunar illum.
HIERARCH ESO OBS NAME = 'MOV_Interamnia_3' / OB name
HIERARCH ESO OBS NTPL = 2 / Number of templates within OB
HIERARCH ESO OBS OBSERVER = 'UNKNOWN' / Observer Name
HIERARCH ESO OBS PI-COI ID = 75634 / ESO internal PI-COI ID
HIERARCH ESO OBS PI-COI NAME = 'UNKNOWN' / PI-COI name
HIERARCH ESO OBS PROG ID = '199.C-0074(D)' / ESO program identification
HIERARCH ESO OBS START = '2019-01-08T02:57:49' / OB start time
HIERARCH ESO OBS STREHLRATIO = 0. / Req. strehl ratio
HIERARCH ESO OBS TARG NAME = '704 Interamnia' / OB target name
HIERARCH ESO OBS TPLNO = 2 / Template number within OB
HIERARCH ESO OBS TWILIGHT = -30 / Req. twilight
HIERARCH ESO OBS WATERVAPOUR = 0. / Req. water vapour
HIERARCH ESO TPL DID = 'ESO-VLT-DIC.TPL-1.9' / Data dictionary for TPL
HIERARCH ESO TPL EXPNO = 4 / Exposure number within template
HIERARCH ESO TPL ID = 'SPHERE_zimpol_i_obs' / Template signature ID
HIERARCH ESO TPL NAME = 'Scientific exposures with ZIMPOL in mode I' / Template
HIERARCH ESO TPL NEXP = 5 / Number of exposures within template
HIERARCH ESO TPL PRESEQ = 'SPHERE_zimpol_i_obs.seq' / Sequencer script
HIERARCH ESO TPL START = '2019-01-08T03:02:28' / TPL start time
HIERARCH ESO TPL VERSION = '$Revision: 303266 $' / Version of the template
HIERARCH ESO TEL AIRM END = 1.557 / Airmass at end
HIERARCH ESO TEL AIRM START = 1.569 / Airmass at start
HIERARCH ESO TEL ALT = 39.528 / [deg] Alt angle at start
HIERARCH ESO TEL AMBI FWHM END = 0.59 / [arcsec] Observatory Seeing queried from
HIERARCH ESO TEL AMBI FWHM START = 0.65 / [arcsec] Observatory Seeing queried fr
HIERARCH ESO TEL AMBI IRSKY TEMP = -91.4 / Temperature of the IR sky, from radio
HIERARCH ESO TEL AMBI IWV END = 3.13 / Integrated Water Vapor
HIERARCH ESO TEL AMBI IWV START = 3.13 / Integrated Water Vapor
HIERARCH ESO TEL AMBI IWV30D END = 3.16 / IWV at 30deg elev.
HIERARCH ESO TEL AMBI IWV30D START = 3.21 / IWV at 30deg elev.
HIERARCH ESO TEL AMBI IWV30DSTD END = 0.05 / IWV at 30deg elev.
HIERARCH ESO TEL AMBI IWV30DSTD START = 0.03 / IWV at 30deg elev.
HIERARCH ESO TEL AMBI IWVSTD END = 0.02 / Standard Deviation of Integrated Water
HIERARCH ESO TEL AMBI IWVSTD START = 0.02 / Standard Deviation of Integrated Wat
HIERARCH ESO TEL AMBI PRES END = 744.83 / [hPa] Observatory ambient air pressure
HIERARCH ESO TEL AMBI PRES START = 744.8 / [hPa] Observatory ambient air pressu
HIERARCH ESO TEL AMBI RHUM = 13. / [%] Observatory ambient relative humidity qu
HIERARCH ESO TEL AMBI TAU0 = 0.0029 / [s] Average coherence time
HIERARCH ESO TEL AMBI TEMP = 12.21 / [deg C] Observatory ambient temperature que
HIERARCH ESO TEL AMBI WINDDIR = 350. / [deg] Observatory ambient wind direction
HIERARCH ESO TEL AMBI WINDSP = 4.5 / [m/s] Observatory ambient wind speed queri
HIERARCH ESO TEL AZ = 221.038 / [deg] Az angle at start S=0,W=90
HIERARCH ESO TEL CHOP ST = F / True when chopping is active
HIERARCH ESO TEL DATE = '2000-01-01T00:00:00' / TCS installation date
HIERARCH ESO TEL DID = 'ESO-VLT-DIC.TCS' / Data dictionary for TEL
HIERARCH ESO TEL DOME STATUS = 'FULLY-OPEN' / Dome status
HIERARCH ESO TEL FO POS = 11.641 / Adapter focus position during tracking
HIERARCH ESO TEL FOCU ID = 'NA' / Telescope focus station ID
HIERARCH ESO TEL FOCU LEN = 120. / [m] Focal length
HIERARCH ESO TEL FOCU SCALE = 1.718 / [arcsec/mm] Focal scale
HIERARCH ESO TEL FOCU VALUE = -30.877 / [mm] M2 setting
HIERARCH ESO TEL GEOELEV = 2648. / [m] Elevation above sea level
HIERARCH ESO TEL GEOLAT = -24.6268 / [deg] Tel geo latitute (+=North)
HIERARCH ESO TEL GEOLON = -70.4045 / [deg] Tel geo longitude (+=East)
HIERARCH ESO TEL IA FWHM = 1.18 / [arcsec] Delivered seeing corrected by airmass
HIERARCH ESO TEL IA FWHMLIN = 1.39 / Delivered seeing on IA detector (linear fit
HIERARCH ESO TEL IA FWHMLINOBS = 1.81 / Delivered seeing on IA detector (linear
HIERARCH ESO TEL ID = 'v 315433' / TCS version number
HIERARCH ESO TEL MOON DEC = -18.37045 / [deg] -18:22:13.6 DEC (J2000)
HIERARCH ESO TEL MOON RA = 312.23752 / [deg] 20:48:57.0 RA (J2000)
HIERARCH ESO TEL OPER = 'I, Condor' / Telescope Operator
HIERARCH ESO TEL PARANG END = -142.342 / [deg] Parallactic angle at end
HIERARCH ESO TEL PARANG START = -141.773 / [deg] Parallactic angle at start
HIERARCH ESO TEL TARG ALPHA = 74618.454 / Alpha coordinate for the target
HIERARCH ESO TEL TARG COORDTYPE = 'M' / Coordinate type (M=mean A=apparen
HIERARCH ESO TEL TARG DELTA = 152051.224 / Delta coordinate for the target
HIERARCH ESO TEL TARG EPOCH = 2000. / [yr] Epoch 1950 or 2000
HIERARCH ESO TEL TARG EPOCHSYSTEM = 'J' / Epoch system (J=Julian / B=Bess
HIERARCH ESO TEL TARG EQUINOX = 2000. / [yr] Equinox
HIERARCH ESO TEL TARG PARALLAX = 0. / [arcsec] Parallax
HIERARCH ESO TEL TARG PMA = 0. / [arcsec/yr] Proper Motion Alpha
HIERARCH ESO TEL TARG PMD = 0. / [arcsec/yr] Proper motion Delta
HIERARCH ESO TEL TARG RADVEL = 0. / [km/s] Radial velocity
HIERARCH ESO TEL TH M1 TEMP = 10.92 / [deg C] M1 superficial temperature
HIERARCH ESO TEL TRAK RATEA = 14.990078 / [arcsec/s] Tracking rate in RA
HIERARCH ESO TEL TRAK RATED = 14.998327 / [arcsec/s] Tracking rate in DEC
HIERARCH ESO TEL TRAK STATUS = 'DIFFERENTIAL' / Tracking status
HIERARCH ESO INS COMB POLA = '' / Polarisation combination name.
HIERARCH ESO INS COMB VCOR = 'V_NC_WF' / Visible coronograph combination name.
HIERARCH ESO INS DATE = '2000-06-16' / Instrument release date (yyyy-mm-dd).
HIERARCH ESO INS3 DID1 = 'ZIMPOL_ICS-270684' / Data dictionary for INS.
HIERARCH ESO INS3 DID2 = 'PRIMARY-FITS-1.2' / Data dictionary for INS.
HIERARCH ESO INS3 DROT1 BEGIN = 0. / [deg] Position angle at start.
HIERARCH ESO INS3 DROT1 DEC = 151753.47739 / Telescope declination.
HIERARCH ESO INS3 DROT1 END = 0. / [deg] Position angle at end.
HIERARCH ESO INS3 DROT1 MODE = 'STAT' / Rotation mode for ZIMP comp rot.
HIERARCH ESO INS3 DROT1 POSANG = 0. / [deg] Position angle.
HIERARCH ESO INS3 DROT1 RA = 74721.279965 / Telescope right ascension.
HIERARCH ESO INS3 DROT2 BEGIN = 0. / [deg] Position angle at start.
HIERARCH ESO INS3 DROT2 DEC = 151753.47739 / Telescope declination.
HIERARCH ESO INS3 DROT2 END = 0. / [deg] Position angle at end.
HIERARCH ESO INS3 DROT2 MODE = 'STAT' / Rotation mode for ZIMP HWP rot.
HIERARCH ESO INS3 DROT2 POSANG = 0. / [deg] Position angle.
HIERARCH ESO INS3 DROT2 RA = 74721.279965 / Telescope right ascension.
HIERARCH ESO INS3 FLCM DELAY = 45 / ZIMPOL FLC delay compensation
HIERARCH ESO INS3 FLCM MODULATE = F / ZIMPOL FLC modulation off/on (F/T)
HIERARCH ESO INS3 FLCM MPERIOD = 1034 / ZIMPOL FLC modulation period
HIERARCH ESO INS3 FLCM PHASE = 0 / ZIMPOL FLC modulation phase
HIERARCH ESO INS3 FLCM STATUS = 4 / ZIMPOL FLC last status
HIERARCH ESO INS3 FLPG VAL = 0.0013 / [mbar] ZIMPOL FLC pressure
HIERARCH ESO INS3 ID = 'ZIMPOL/176642' / Instrument ID.
HIERARCH ESO INS3 MODE = 'I' / Instrument mode used.
HIERARCH ESO INS3 OPTI1 ID = 'OPEN' / OPTIi unique ID.
HIERARCH ESO INS3 OPTI1 NAME = 'OPEN' / ZIMPOL polarization compensator sele
HIERARCH ESO INS3 OPTI1 NO = 1 / OPTIi slot number.
HIERARCH ESO INS3 OPTI1 TYPE = 'FREE' / OPTIi element.
HIERARCH ESO INS3 OPTI2 ID = 'OPEN' / OPTIi unique ID.
HIERARCH ESO INS3 OPTI2 NAME = 'OPEN' / ZIMPOL common filter
HIERARCH ESO INS3 OPTI2 NO = 1 / OPTIi slot number.
HIERARCH ESO INS3 OPTI2 TYPE = 'FREE' / OPTIi element.
HIERARCH ESO INS3 OPTI3 ID = 'OPEN' / OPTIi unique ID.
HIERARCH ESO INS3 OPTI3 NAME = 'OPEN' / ZIMPOL HW plate selector
HIERARCH ESO INS3 OPTI3 NO = 1 / OPTIi slot number.
HIERARCH ESO INS3 OPTI3 TYPE = 'FREE' / OPTIi element.
HIERARCH ESO INS3 OPTI4 ID = 'OPEN' / OPTIi unique ID.
HIERARCH ESO INS3 OPTI4 NAME = 'OPEN' / ZIMPOL modulator selector
HIERARCH ESO INS3 OPTI4 NO = 1 / OPTIi slot number.
HIERARCH ESO INS3 OPTI4 TYPE = 'FREE' / OPTIi element.
HIERARCH ESO INS3 OPTI5 ID = 'FILT_R_NB' / OPTIi unique ID.
HIERARCH ESO INS3 OPTI5 NAME = 'N_R' / ZIMPOL filter in arm 1
HIERARCH ESO INS3 OPTI5 NO = 6 / OPTIi slot number.
HIERARCH ESO INS3 OPTI5 TYPE = 'FILTER' / OPTIi element.
HIERARCH ESO INS3 OPTI6 ID = 'FILT_R_NB' / OPTIi unique ID.
HIERARCH ESO INS3 OPTI6 NAME = 'N_R' / ZIMPOL filter in arm 2
HIERARCH ESO INS3 OPTI6 NO = 6 / OPTIi slot number.
HIERARCH ESO INS3 OPTI6 TYPE = 'FILTER' / OPTIi element.
HIERARCH ESO INS3 POS1 ENC = 30350 / [Enc] Absolute position.
HIERARCH ESO INS3 POS1 POS = 25. / [deg] ZIMPOL compensator tilt angle.
HIERARCH ESO INS3 POS1 SWSIM = T / If T, function is software simulated.
HIERARCH ESO INS3 POS2 ENC = -6343 / [Enc] Absolute position.
HIERARCH ESO INS3 POS2 POS = -20.1 / [pix] ZIMPOL tilt1 mirror position.
HIERARCH ESO INS3 POS3 ENC = 11822 / [Enc] Absolute position.
HIERARCH ESO INS3 POS3 POS = 14. / [pix] ZIMPOL tilt2 mirror position.
HIERARCH ESO INS3 POS4 ENC = 5364 / [Enc] Absolute position.
HIERARCH ESO INS3 POS4 POS = 6.1 / [pix] ZIMPOL tilt3 mirror position.
HIERARCH ESO INS3 POS5 ENC = 0 / [Enc] Absolute position.
HIERARCH ESO INS3 POS5 POS = 0. / [pix] ZIMPOL tilt4 mirror position.
HIERARCH ESO INS3 POS6 ENC = 11808 / [Enc] Absolute position.
HIERARCH ESO INS3 POS6 POS = 14. / [pix] ZIMPOL tilt5 mirror position.
HIERARCH ESO INS3 POS7 ENC = -13143 / [Enc] Absolute position.
HIERARCH ESO INS3 POS7 POS = -14. / [pix] ZIMPOL tilt6 mirror position.
HIERARCH ESO INS3 SENS301 VAL = 3.09E-05 / [mbar] ZIMPOL detector P.
HIERARCH ESO INS3 SENSOR1 ID = 'flom' / Sensor device unique id.
HIERARCH ESO INS3 SENSOR1 NAME = 'FLC modulator T' / Sensor device common name.
HIERARCH ESO INS3 SWSIM = 'NORMAL' / Software simulation.
HIERARCH ESO INS3 TEMP301 ID = 'TEMP1' / Temperature sensor ID.
HIERARCH ESO INS3 TEMP301 NAME = 'Temperature sensor' / Temperature sensor name.
HIERARCH ESO INS3 TEMP301 VAL = 25. / [C] ZIMPOL FLC T.
HIERARCH ESO INS3 TEMP302 VAL = 188.15 / [K] ZIMPOL detector T.
HIERARCH ESO INS3 TEMP303 VAL = 188. / [K] ZIMPOL detector T setpoint.
HIERARCH ESO INS3 TEMP304 VAL = 189.37 / [K] ZIMPOL detector T -spare.
HIERARCH ESO INS3 TEMP305 VAL = 300. / [K] ZIMPOL detector T setpoint -spare.
HIERARCH ESO INS3 TEMP306 VAL = 92.76 / [K] ZIMPOL cold plate T.
HIERARCH ESO INS3 TEMP307 VAL = 93. / [K] ZIMPOL cold plate T setpoint.
HIERARCH ESO INS3 TEMP308 VAL = 273.16 / [K] ZIMPOL exhausted gas T.
HIERARCH ESO INS3 TEMP309 VAL = 273. / [K] ZIMPOL exhausted gas T setpoint.
HIERARCH ESO INS3 TEMP310 VAL = 117.59 / [K] ZIMPOL sorption pump T.
HIERARCH ESO INS3 TEMP311 VAL = 0. / [K] ZIMPOL sorption pump T setpoint.
HIERARCH ESO INS3 TEMP312 ID = 'SETP' / Temperature sensor ID.
HIERARCH ESO INS3 TEMP312 NAME = 'FLC T set point' / Temperature sensor name.
HIERARCH ESO INS3 TEMP312 VAL = 25. / [C] ZIMPOL FLC T set point.
HIERARCH ESO INS4 ADC1 BEGIN = 91.819 / [deg] Position angle at start.
HIERARCH ESO INS4 ADC1 DEC = 151753.52338 / Telescope declination.
HIERARCH ESO INS4 ADC1 END = 91.828 / [deg] Position angle at end.
HIERARCH ESO INS4 ADC1 MODE = 'AUTO' / NIR ADC motor 1 compensation mode.
HIERARCH ESO INS4 ADC1 RA = 74721.300108 / Telescope right ascension.
HIERARCH ESO INS4 ADC2 BEGIN = 14.593 / [deg] Position angle at start.
HIERARCH ESO INS4 ADC2 DEC = 151753.52338 / Telescope declination.
HIERARCH ESO INS4 ADC2 END = 15.716 / [deg] Position angle at end.
HIERARCH ESO INS4 ADC2 MODE = 'AUTO' / NIR ADC motor 2 compensation mode.
HIERARCH ESO INS4 ADC2 RA = 74721.300108 / Telescope right ascension.
HIERARCH ESO INS4 ADC3 BEGIN = -89.852 / [deg] Position angle at start.
HIERARCH ESO INS4 ADC3 DEC = 151753.52338 / Telescope declination.
HIERARCH ESO INS4 ADC3 END = -89.9435 / [deg] Position angle at end.
HIERARCH ESO INS4 ADC3 MODE = 'AUTO' / VIS ADC motor 1 compensation mode.
HIERARCH ESO INS4 ADC3 RA = 74721.300108 / Telescope right ascension.
HIERARCH ESO INS4 ADC4 BEGIN = -11.739 / [deg] Position angle at start.
HIERARCH ESO INS4 ADC4 DEC = 151753.52338 / Telescope declination.
HIERARCH ESO INS4 ADC4 END = -12.9135 / [deg] Position angle at end.
HIERARCH ESO INS4 ADC4 MODE = 'AUTO' / VIS ADC motor 2 compensation mode.
HIERARCH ESO INS4 ADC4 RA = 74721.300108 / Telescope right ascension.
HIERARCH ESO INS4 BILZ ERROR = 0 / BILZ stabilization system error status
HIERARCH ESO INS4 BILZ ID = 'bilz' / BILZ stabilization system Device ID
HIERARCH ESO INS4 BILZ INWORD = 1799 / BILZ stabilization input word
HIERARCH ESO INS4 BILZ OUTWORD = 110 / BILZ stabilization output word
HIERARCH ESO INS4 BILZ STATUS = 40964 / BILZ stabilization system status
HIERARCH ESO INS4 BILZ SWSIM = F / If T, function is software simulated
HIERARCH ESO INS4 COMB CAL = 'OBS' / Calibration devices in common path
HIERARCH ESO INS4 COMB CALSEL = 'OPEN' / For internal use, open the calib. s
HIERARCH ESO INS4 COMB CPI = 'OPEN' / Assembly for CPI global settings
HIERARCH ESO INS4 COMB IBS = '' / Assembly for infrared beamsplitter
HIERARCH ESO INS4 COMB POLA_CPI = 'N_DP' / Assembly for polarimetry at CPI l
HIERARCH ESO INS4 COMB ROT = 'FIELD' / Assembly for derotator and ADC modes
HIERARCH ESO INS4 COMB VBS = '' / Assembly for visible beamsplitter
HIERARCH ESO INS4 DID1 = 'SPHERE_ICS-295670' / Data dictionary for INS.
HIERARCH ESO INS4 DID2 = 'PRIMARY-FITS-1.2' / Data dictionary for INS.
HIERARCH ESO INS4 DROT1 BEGIN = 0. / [deg] Position angle at start.
HIERARCH ESO INS4 DROT1 DEC = 151753.52338 / Telescope desclination.
HIERARCH ESO INS4 DROT1 END = 0. / [deg] Position angle at end.
HIERARCH ESO INS4 DROT1 MODE = 'STAT' / Half-Wave Plate 1 rotation mode.
HIERARCH ESO INS4 DROT1 POSANG = 0. / [deg] Position angle.
HIERARCH ESO INS4 DROT1 RA = 74721.300108 / Telescope right ascension.
HIERARCH ESO INS4 DROT2 BEGIN = -269.3548 / [deg] Position angle at start.
HIERARCH ESO INS4 DROT2 DEC = 151753.52338 / Telescope desclination.
HIERARCH ESO INS4 DROT2 END = -268.878 / [deg] Position angle at end.
HIERARCH ESO INS4 DROT2 MODE = 'SKY' / Derotator mode.
HIERARCH ESO INS4 DROT2 POSANG = 0. / [deg] Position angle.
HIERARCH ESO INS4 DROT2 RA = 74721.300108 / Telescope right ascension.
HIERARCH ESO INS4 DROT3 BEGIN = 0. / [deg] Position angle at start.
HIERARCH ESO INS4 DROT3 DEC = 151753.52338 / Telescope desclination.
HIERARCH ESO INS4 DROT3 END = 0. / [deg] Position angle at end.
HIERARCH ESO INS4 DROT3 MODE = 'STAT' / Half-Wave Plate 2 rotation mode.
HIERARCH ESO INS4 DROT3 POSANG = 0. / [deg] Position angle.
HIERARCH ESO INS4 DROT3 RA = 74721.300108 / Telescope right ascension.
HIERARCH ESO INS4 FILT1 ID = 'FILT_ND_4.0' / Filter unique id.
HIERARCH ESO INS4 FILT1 NAME = 'ND_4.0' / Calibration unit filter.
HIERARCH ESO INS4 FILT1 NO = 7 / Filter wheel position index.
HIERARCH ESO INS4 FILT2 ID = 'FILT_ND_3.5' / Filter unique id.
HIERARCH ESO INS4 FILT2 NAME = 'ND_3.5' / NIR Neutral Density filters.
HIERARCH ESO INS4 FILT2 NO = 4 / Filter wheel position index.
HIERARCH ESO INS4 FILT3 ID = 'OPEN' / Filter unique id.
HIERARCH ESO INS4 FILT3 NAME = 'OPEN' / Wavefront sensor spectral filter.
HIERARCH ESO INS4 FILT3 NO = 1 / Filter wheel position index.
HIERARCH ESO INS4 ID = 'SPHERE/176642' / Instrument ID.
HIERARCH ESO INS4 LAMP2 SWSIM = T / T for software simulation.
HIERARCH ESO INS4 LAMPPWR2 SWSIM = T / T for software simulation.
HIERARCH ESO INS4 MODE = 'ZIMPOL_I' / Instrument mode used.
HIERARCH ESO INS4 OPTI1 ID = 'LAMP_QL1' / OPTIi unique ID.
HIERARCH ESO INS4 OPTI1 NAME = 'QTH1' / Quartz-Tungsten-Halogen lamp selecto
HIERARCH ESO INS4 OPTI1 NO = 1 / OPTIi slot number.
HIERARCH ESO INS4 OPTI1 TYPE = 'LAMP' / OPTIi element.
HIERARCH ESO INS4 OPTI10 ID = 'OPEN' / OPTIi unique ID.
HIERARCH ESO INS4 OPTI10 NAME = 'OPEN' / Apodizers wheel.
HIERARCH ESO INS4 OPTI10 NO = 1 / OPTIi slot number.
HIERARCH ESO INS4 OPTI10 TYPE = 'FREE' / OPTIi element.
HIERARCH ESO INS4 OPTI11 ID = 'OPEN' / OPTIi unique ID.
HIERARCH ESO INS4 OPTI11 NAME = 'OPEN' / NIR coronagraphs wheel.
HIERARCH ESO INS4 OPTI11 NO = 1 / OPTIi slot number.
HIERARCH ESO INS4 OPTI11 TYPE = 'MASK' / OPTIi element.
HIERARCH ESO INS4 OPTI12 ID = 'OPEN' / OPTIi unique ID.
HIERARCH ESO INS4 OPTI12 NAME = 'OPEN' / FP3 source selector.
HIERARCH ESO INS4 OPTI12 NO = 1 / OPTIi slot number.
HIERARCH ESO INS4 OPTI12 SWSIM = T / T for software simulation.
HIERARCH ESO INS4 OPTI12 TYPE = 'FREE' / OPTIi element.
HIERARCH ESO INS4 OPTI13 ID = 'MIRR_YJHK' / OPTIi unique ID.
HIERARCH ESO INS4 OPTI13 NAME = 'MIRR' / IRDIS-IFS selector.
HIERARCH ESO INS4 OPTI13 NO = 1 / OPTIi slot number.
HIERARCH ESO INS4 OPTI13 TYPE = 'MIRROR' / OPTIi element.
HIERARCH ESO INS4 OPTI14 ID = 'OPEN' / OPTIi unique ID.
HIERARCH ESO INS4 OPTI14 NAME = 'OPEN' / IFS Lyot wheel.
HIERARCH ESO INS4 OPTI14 NO = 1 / OPTIi slot number.
HIERARCH ESO INS4 OPTI14 TYPE = 'FREE' / OPTIi element.
HIERARCH ESO INS4 OPTI15 ID = 'OPEN' / OPTIi unique ID.
HIERARCH ESO INS4 OPTI15 NAME = 'OPEN' / IFS pupil lens.
HIERARCH ESO INS4 OPTI15 NO = 1 / OPTIi slot number.
HIERARCH ESO INS4 OPTI15 TYPE = 'FREE' / OPTIi element.
HIERARCH ESO INS4 OPTI16 ID = 'DICR_HA_VIS' / OPTIi unique ID.
HIERARCH ESO INS4 OPTI16 NAME = 'DIC_HA' / WFS-ZIMPOL selector.
HIERARCH ESO INS4 OPTI16 NO = 3 / OPTIi slot number.
HIERARCH ESO INS4 OPTI16 TYPE = 'DICHROIC' / OPTIi element.
HIERARCH ESO INS4 OPTI17 ID = 'MASK_CLEARV_1' / OPTIi unique ID.
HIERARCH ESO INS4 OPTI17 NAME = 'CLEAR1' / VIS coronagraphs wheel.
HIERARCH ESO INS4 OPTI17 NO = 1 / OPTIi slot number.
HIERARCH ESO INS4 OPTI17 TYPE = 'MASK' / OPTIi element.
HIERARCH ESO INS4 OPTI18 ID = 'OPEN' / OPTIi unique ID.
HIERARCH ESO INS4 OPTI18 NAME = 'OPEN' / FP4 source select.
HIERARCH ESO INS4 OPTI18 NO = 1 / OPTIi slot number.
HIERARCH ESO INS4 OPTI18 SWSIM = T / T for software simulation.
HIERARCH ESO INS4 OPTI18 TYPE = 'FREE' / OPTIi element.
HIERARCH ESO INS4 OPTI19 ID = 'OPEN' / OPTIi unique ID.
HIERARCH ESO INS4 OPTI19 NAME = 'OPEN' / VIS Lyot stop wheel.
HIERARCH ESO INS4 OPTI19 NO = 1 / OPTIi slot number.
HIERARCH ESO INS4 OPTI19 TYPE = 'MASK' / OPTIi element.
HIERARCH ESO INS4 OPTI2 ID = 'FIBR_FP1_VIS' / OPTIi unique ID.
HIERARCH ESO INS4 OPTI2 NAME = 'FP1_VIS' / Fiber selector.
HIERARCH ESO INS4 OPTI2 NO = 1 / OPTIi slot number.
HIERARCH ESO INS4 OPTI2 TYPE = 'FIBER' / OPTIi element.
HIERARCH ESO INS4 OPTI20 ID = 'FP3_1' / OPTIi unique ID.
HIERARCH ESO INS4 OPTI20 NAME = 'FP3_1' / FP3 focus stage.
HIERARCH ESO INS4 OPTI20 NO = 1 / OPTIi slot number.
HIERARCH ESO INS4 OPTI20 SWSIM = T / T for software simulation.
HIERARCH ESO INS4 OPTI20 TYPE = 'FIBER' / OPTIi element.
HIERARCH ESO INS4 OPTI21 ID = 'FP4_2' / OPTIi unique ID.
HIERARCH ESO INS4 OPTI21 NAME = 'FP4_2' / FP4 focus stage.
HIERARCH ESO INS4 OPTI21 NO = 2 / OPTIi slot number.
HIERARCH ESO INS4 OPTI21 SWSIM = T / T for software simulation.
HIERARCH ESO INS4 OPTI21 TYPE = 'FIBER' / OPTIi element.
HIERARCH ESO INS4 OPTI22 ID = 'MEDIUM' / OPTIi unique ID.
HIERARCH ESO INS4 OPTI22 NAME = 'MEDIUM' / WFS spatial filter.
HIERARCH ESO INS4 OPTI22 NO = 3 / OPTIi slot number.
HIERARCH ESO INS4 OPTI22 TYPE = 'MASK' / OPTIi element.
HIERARCH ESO INS4 OPTI3 ID = 'OPEN' / OPTIi unique ID.
HIERARCH ESO INS4 OPTI3 NAME = 'OPEN' / FP1 source selector.
HIERARCH ESO INS4 OPTI3 NO = 1 / OPTIi slot number.
HIERARCH ESO INS4 OPTI3 TYPE = 'FREE' / OPTIi element.
HIERARCH ESO INS4 OPTI4 ID = 'FOCU_NOM' / OPTIi unique ID.
HIERARCH ESO INS4 OPTI4 NAME = 'NOM' / FP1 focus.
HIERARCH ESO INS4 OPTI4 NO = 1 / OPTIi slot number.
HIERARCH ESO INS4 OPTI4 TYPE = 'FOCUS' / OPTIi element.
HIERARCH ESO INS4 OPTI5 ID = 'MASK_GRID' / OPTIi unique ID.
HIERARCH ESO INS4 OPTI5 NAME = 'GRID' / [mm] Grid selector vert. position.
HIERARCH ESO INS4 OPTI5 NO = 2 / OPTIi slot number.
HIERARCH ESO INS4 OPTI5 TYPE = 'MASK' / OPTIi element.
HIERARCH ESO INS4 OPTI6 ID = 'OPEN' / OPTIi unique ID.
HIERARCH ESO INS4 OPTI6 NAME = 'OPEN' / Half-Wave Plate 1 selector.
HIERARCH ESO INS4 OPTI6 NO = 1 / OPTIi slot number.
HIERARCH ESO INS4 OPTI6 TYPE = 'FREE' / OPTIi element.
HIERARCH ESO INS4 OPTI7 ID = 'OPEN' / OPTIi unique ID.
HIERARCH ESO INS4 OPTI7 NAME = 'OPEN' / Common path polarizers.
HIERARCH ESO INS4 OPTI7 NO = 1 / OPTIi slot number.
HIERARCH ESO INS4 OPTI7 TYPE = 'FREE' / OPTIi element.
HIERARCH ESO INS4 OPTI8 ID = 'OPEN' / OPTIi unique ID.
HIERARCH ESO INS4 OPTI8 NAME = 'OPEN' / Half-Wave Plate 2 selector.
HIERARCH ESO INS4 OPTI8 NO = 1 / OPTIi slot number.
HIERARCH ESO INS4 OPTI8 TYPE = 'FREE' / OPTIi element.
HIERARCH ESO INS4 OPTI9 ID = 'OPEN' / OPTIi unique ID.
HIERARCH ESO INS4 OPTI9 NAME = 'OPEN' / FP2 source selector.
HIERARCH ESO INS4 OPTI9 NO = 1 / OPTIi slot number.
HIERARCH ESO INS4 OPTI9 TYPE = 'FREE' / OPTIi element.
HIERARCH ESO INS4 POS ENC = 18075 / [Enc] Absolute position of Active Toric Mirr
HIERARCH ESO INS4 POS POS = 18075. / [nmrms] Position of Active Toric Mirror 3.
HIERARCH ESO INS4 SENS401 ID = 'PCNT' / Sensor ID.
HIERARCH ESO INS4 SENS401 NAME = 'Part. counter status' / sensor common name.
HIERARCH ESO INS4 SENS401 VAL = 0. / Particle counter status.
HIERARCH ESO INS4 SENS402 ID = 'PCNT' / Sensor ID.
HIERARCH ESO INS4 SENS402 NAME = 'Part. counter 0.5um' / sensor common name.
HIERARCH ESO INS4 SENS402 VAL = -87500. / [p/m3] Particle counter 0.5 um.
HIERARCH ESO INS4 SENS403 ID = 'PCNT' / Sensor ID.
HIERARCH ESO INS4 SENS403 NAME = 'Part. counter 5.0um' / sensor common name.
HIERARCH ESO INS4 SENS403 VAL = -8750. / [p/m3] Particle counter 5.0 um.
HIERARCH ESO INS4 SENS404 ID = 'CBL1I' / Sensor ID.
HIERARCH ESO INS4 SENS404 NAME = 'Laser 1330 - current' / sensor common name.
HIERARCH ESO INS4 SENS404 VAL = -0. / [mA] Laser 1330 - current.
HIERARCH ESO INS4 SENS405 ID = 'CBL1T' / Sensor ID.
HIERARCH ESO INS4 SENS405 NAME = 'Laser 1330 - T error' / sensor common name.
HIERARCH ESO INS4 SENS405 VAL = -0.347 / [K] Laser 1330 - T error.
HIERARCH ESO INS4 SENS406 ID = 'CBL2I' / Sensor ID.
HIERARCH ESO INS4 SENS406 NAME = 'Laser 1550 - current' / sensor common name.
HIERARCH ESO INS4 SENS406 VAL = -0. / [mA] Laser 1550 - current.
HIERARCH ESO INS4 SENS407 ID = 'CBL2T' / Sensor ID.
HIERARCH ESO INS4 SENS407 NAME = 'Laser 1550 - T error' / sensor common name.
HIERARCH ESO INS4 SENS407 VAL = 0.111 / [K] Laser 1550 - T error.
HIERARCH ESO INS4 SENS408 ID = 'CBL3I' / Sensor ID.
HIERARCH ESO INS4 SENS408 NAME = 'Laser 980 - current' / sensor common name.
HIERARCH ESO INS4 SENS408 VAL = -0.001 / [mA] Laser 980 - current.
HIERARCH ESO INS4 SENS409 ID = 'CBL3T' / Sensor ID.
HIERARCH ESO INS4 SENS409 NAME = 'Laser 980 - T error' / sensor common name.
HIERARCH ESO INS4 SENS409 VAL = -0.125 / [K] Laser 980 - T error.
HIERARCH ESO INS4 SENS410 ID = 'CBL4I' / Sensor ID.
HIERARCH ESO INS4 SENS410 NAME = 'Laser 1742 - current' / sensor common name.
HIERARCH ESO INS4 SENS410 VAL = -0. / [mA] Laser 1742 - current.
HIERARCH ESO INS4 SENS411 ID = 'CBL4T' / Sensor ID.
HIERARCH ESO INS4 SENS411 NAME = 'Laser 1742 - T error' / sensor common name.
HIERARCH ESO INS4 SENS411 VAL = -0.347 / [K] Laser 1742 - T error.
HIERARCH ESO INS4 SENS412 ID = 'CBL5I' / Sensor ID.
HIERARCH ESO INS4 SENS412 NAME = 'Laser 2004 - current' / sensor common name.
HIERARCH ESO INS4 SENS412 VAL = -0. / [mA] Laser 2004 - current.
HIERARCH ESO INS4 SENS413 ID = 'CBL5T' / Sensor ID.
HIERARCH ESO INS4 SENS413 NAME = 'Laser 2004 - T error' / sensor common name.
HIERARCH ESO INS4 SENS413 VAL = -0.125 / [K] Laser 2004 - T error.
HIERARCH ESO INS4 SENS414 ID = 'CBL6I' / Sensor ID.
HIERARCH ESO INS4 SENS414 NAME = 'Laser 1080 - current' / sensor common name.
HIERARCH ESO INS4 SENS414 VAL = -0.001 / [mA] Laser 1080 - current.
HIERARCH ESO INS4 SENS415 ID = 'CBL6T' / Sensor ID.
HIERARCH ESO INS4 SENS415 NAME = 'Laser 1080 - T error' / sensor common name.
HIERARCH ESO INS4 SENS415 VAL = 0.111 / [K] Laser 1080 - T error.
HIERARCH ESO INS4 SENS416 ID = 'CBBLI' / Sensor ID.
HIERARCH ESO INS4 SENS416 NAME = 'Laser 532 - current' / sensor common name.
HIERARCH ESO INS4 SENS416 VAL = 0. / [mA] Laser 532 - current.
HIERARCH ESO INS4 SENS417 ID = 'CFPD1' / Sensor ID.
HIERARCH ESO INS4 SENS417 NAME = 'VIS FF intensity' / sensor common name.
HIERARCH ESO INS4 SENS417 VAL = 0. / [V] Quartz-Tungsten-Halogen lamp: VIS FF
HIERARCH ESO INS4 SENS418 ID = 'CFPD2' / Sensor ID.
HIERARCH ESO INS4 SENS418 NAME = 'NIR FF intensity' / sensor common name.
HIERARCH ESO INS4 SENS418 VAL = 0.002 / [V] Quartz-Tungsten-Halogen lamp: NIR FF
HIERARCH ESO INS4 SENS419 ID = 'CBPD' / Sensor ID.
HIERARCH ESO INS4 SENS419 NAME = 'QTH on/off' / sensor common name.
HIERARCH ESO INS4 SENS419 VAL = 0 / Quartz-Tungsten-Halogen lamp: on/off.
HIERARCH ESO INS4 SENS424 VAL = 9.97E-06 / [mbar] DTTS vessel pressure.
HIERARCH ESO INS4 SENS425 ID = 'CBIL' / Sensor ID.
HIERARCH ESO INS4 SENS425 NAME = 'CalUnit door' / sensor common name.
HIERARCH ESO INS4 SENS425 VAL = 1 / Calibration unit door: closed/open.
HIERARCH ESO INS4 SENS426 ID = 'HEAT' / Sensor ID.
HIERARCH ESO INS4 SENS426 NAME = 'Heater range' / sensor common name.
HIERARCH ESO INS4 SENS426 VAL = 0. / [mW] DTTS heater power.
HIERARCH ESO INS4 SENS427 ID = 'HEAT' / Sensor ID.
HIERARCH ESO INS4 SENS427 NAME = 'Heater output' / sensor common name.
HIERARCH ESO INS4 SENS427 VAL = 0. / [%] DTTS heater output.
HIERARCH ESO INS4 SENS428 ID = 'HODM' / Sensor ID.
HIERARCH ESO INS4 SENS428 NAME = 'HODM relative Humidity sensor' / sensor common
HIERARCH ESO INS4 SENS428 VAL = -37.6 / [%] HODM relative Humidity.
HIERARCH ESO INS4 SENSOR1 ID = 'cpyg' / Sensor device unique id.
HIERARCH ESO INS4 SENSOR1 NAME = 'Yokogawa DAQ' / Sensor device common name.
HIERARCH ESO INS4 SENSOR10 ID = 'ccc2' / Sensor device unique id.
HIERARCH ESO INS4 SENSOR10 NAME = 'Cabinet T WIDE' / Sensor device common name.
HIERARCH ESO INS4 SENSOR11 ID = 'ccc3' / Sensor device unique id.
HIERARCH ESO INS4 SENSOR11 NAME = 'Cabinet T TALL' / Sensor device common name.
HIERARCH ESO INS4 SENSOR12 ID = 'cbil' / Sensor device unique id.
HIERARCH ESO INS4 SENSOR12 NAME = 'Cal unit interlock' / Sensor device common na
HIERARCH ESO INS4 SENSOR2 ID = 'dtls' / Sensor device unique id.
HIERARCH ESO INS4 SENSOR2 NAME = 'Lake Det T control' / Sensor device common nam
HIERARCH ESO INS4 SENSOR3 ID = 'asen1' / Sensor device unique id.
HIERARCH ESO INS4 SENSOR3 NAME = 'Analog sen. calbox' / Sensor device common nam
HIERARCH ESO INS4 SENSOR4 ID = 'asen2' / Sensor device unique id.
HIERARCH ESO INS4 SENSOR4 NAME = 'QTH lamp sensor' / Sensor device common name.
HIERARCH ESO INS4 SENSOR5 ID = 'asen3' / Sensor device unique id.
HIERARCH ESO INS4 SENSOR5 NAME = 'Calib unit T sensor' / Sensor device common na
HIERARCH ESO INS4 SENSOR6 ID = 'cbpd' / Sensor device unique id.
HIERARCH ESO INS4 SENSOR6 NAME = 'QTH lamp sensor' / Sensor device common name.
HIERARCH ESO INS4 SENSOR9 ID = 'ccc1' / Sensor device unique id.
HIERARCH ESO INS4 SENSOR9 NAME = 'Cabinet T SMALL' / Sensor device common name.
HIERARCH ESO INS4 SHUT ST = T / Shutter open [T] or closed [F].
HIERARCH ESO INS4 SHUT SWSIM = F / T for software simulation.
HIERARCH ESO INS4 SWSIM = 'NORMAL' / Software simulation.
HIERARCH ESO INS4 TEMP401 ID = 'T1' / Temperature sensor ID.
HIERARCH ESO INS4 TEMP401 NAME = 'OBE Temp 1' / Temperature sensor name.
HIERARCH ESO INS4 TEMP401 VAL = 10000. / [K] *Broken* IRDIS Optical Bench T Le
HIERARCH ESO INS4 TEMP402 ID = 'T2' / Temperature sensor ID.
HIERARCH ESO INS4 TEMP402 NAME = 'OBE Temp 2' / Temperature sensor name.
HIERARCH ESO INS4 TEMP402 VAL = 84.9 / [K] IRDIS Optical Bench T Center.
HIERARCH ESO INS4 TEMP403 ID = 'T3' / Temperature sensor ID.
HIERARCH ESO INS4 TEMP403 NAME = 'OBE Temp 3' / Temperature sensor name.
HIERARCH ESO INS4 TEMP403 VAL = 85.5 / [K] IRDIS Optical Bench T Right.
HIERARCH ESO INS4 TEMP404 ID = 'T4' / Temperature sensor ID.
HIERARCH ESO INS4 TEMP404 NAME = 'TSC Temp 4' / Temperature sensor name.
HIERARCH ESO INS4 TEMP404 VAL = 10000. / [K] *Broken* IRDIS Thermal Screen T H
HIERARCH ESO INS4 TEMP405 ID = 'T5' / Temperature sensor ID.
HIERARCH ESO INS4 TEMP405 NAME = 'TSC Temp 5' / Temperature sensor name.
HIERARCH ESO INS4 TEMP405 VAL = 86.1 / [K] IRDIS Thermal Screen T Middle.
HIERARCH ESO INS4 TEMP406 ID = 'T6' / Temperature sensor ID.
HIERARCH ESO INS4 TEMP406 NAME = 'TSC Temp 6' / Temperature sensor name.
HIERARCH ESO INS4 TEMP406 VAL = 10000. / [K] *Broken* IRDIS Thermal Screen T L
HIERARCH ESO INS4 TEMP407 ID = 'T7' / Temperature sensor ID.
HIERARCH ESO INS4 TEMP407 NAME = 'ANT Temp 7' / Temperature sensor name.
HIERARCH ESO INS4 TEMP407 VAL = 76.7 / [K] IRDIS Aux LN2 Tank T Low.
HIERARCH ESO INS4 TEMP408 ID = 'T8' / Temperature sensor ID.
HIERARCH ESO INS4 TEMP408 NAME = 'ANT Temp 8' / Temperature sensor name.
HIERARCH ESO INS4 TEMP408 VAL = 77.2 / [K] IRDIS Aux LN2 Tank T High.
HIERARCH ESO INS4 TEMP409 ID = 'T9' / Temperature sensor ID.
HIERARCH ESO INS4 TEMP409 NAME = 'MNT Temp 9' / Temperature sensor name.
HIERARCH ESO INS4 TEMP409 VAL = 76.7 / [K] IRDIS Main LN2 Tank T Bottom.
HIERARCH ESO INS4 TEMP410 ID = 'T10' / Temperature sensor ID.
HIERARCH ESO INS4 TEMP410 NAME = 'DET I/T Temp 10' / Temperature sensor name.
HIERARCH ESO INS4 TEMP410 VAL = 77.5 / [K] IRDIS Detector Thermal I/F T1.
HIERARCH ESO INS4 TEMP411 ID = 'T11' / Temperature sensor ID.
HIERARCH ESO INS4 TEMP411 NAME = 'DET I/T Temp 11' / Temperature sensor name.
HIERARCH ESO INS4 TEMP411 VAL = 77.5 / [K] IRDIS Detector Thermal I/F T2.
HIERARCH ESO INS4 TEMP412 ID = 'T12' / Temperature sensor ID.
HIERARCH ESO INS4 TEMP412 NAME = 'IRFW1 Temp' / Temperature sensor name.
HIERARCH ESO INS4 TEMP412 VAL = 123. / [K] IRDIS Filter Wheel 1 T.
HIERARCH ESO INS4 TEMP413 ID = 'T13' / Temperature sensor ID.
HIERARCH ESO INS4 TEMP413 NAME = 'IRLW Temp' / Temperature sensor name.
HIERARCH ESO INS4 TEMP413 VAL = 115. / [K] IRDIS Lyot Wheel T.
HIERARCH ESO INS4 TEMP414 ID = 'T14' / Temperature sensor ID.
HIERARCH ESO INS4 TEMP414 NAME = 'IRFW2 Temp' / Temperature sensor name.
HIERARCH ESO INS4 TEMP414 VAL = 85.9 / [K] IRDIS Filter Wheel 2 T.
HIERARCH ESO INS4 TEMP415 ID = 'T1' / Temperature sensor ID.
HIERARCH ESO INS4 TEMP415 NAME = 'ZIMPOL bench near FLCM' / Temperature sensor n
HIERARCH ESO INS4 TEMP415 VAL = 10000. / [C] ZIMPOL bench FLCM T.
HIERARCH ESO INS4 TEMP416 ID = 'T2' / Temperature sensor ID.
HIERARCH ESO INS4 TEMP416 NAME = 'ZIMPOL bench ambient' / Temperature sensor nam
HIERARCH ESO INS4 TEMP416 VAL = 14.4 / [C] ZIMPOL bench ambient T.
HIERARCH ESO INS4 TEMP417 ID = 'T3' / Temperature sensor ID.
HIERARCH ESO INS4 TEMP417 NAME = 'ZIMPOL bench near cryostat' / Temperature sens
HIERARCH ESO INS4 TEMP417 VAL = 15.1 / [C] ZIMPOL bench cryostat T.
HIERARCH ESO INS4 TEMP418 ID = 'T' / Temperature sensor ID.
HIERARCH ESO INS4 TEMP418 NAME = 'CAN box 1 ambient' / Temperature sensor name.
HIERARCH ESO INS4 TEMP418 VAL = 27.9 / [C] CAN box 1 ambient T.
HIERARCH ESO INS4 TEMP419 ID = 'T' / Temperature sensor ID.
HIERARCH ESO INS4 TEMP419 NAME = 'CAN box 2 ambient' / Temperature sensor name.
HIERARCH ESO INS4 TEMP419 VAL = 25.8 / [C] CAN box 2 ambient T.
HIERARCH ESO INS4 TEMP420 ID = 'T' / Temperature sensor ID.
HIERARCH ESO INS4 TEMP420 NAME = 'CAN box 3 ambient' / Temperature sensor name.
HIERARCH ESO INS4 TEMP420 VAL = 10000. / [C] CAN box 3 ambient T.
HIERARCH ESO INS4 TEMP421 ID = 'T' / Temperature sensor ID.
HIERARCH ESO INS4 TEMP421 NAME = 'Enclosure ambient T' / Temperature sensor name
HIERARCH ESO INS4 TEMP421 VAL = 12.8 / [C] Air temperature in SPHERE enclosure.
HIERARCH ESO INS4 TEMP422 ID = 'T' / Temperature sensor ID.
HIERARCH ESO INS4 TEMP422 NAME = 'HODM T sensor' / Temperature sensor name.
HIERARCH ESO INS4 TEMP422 VAL = 14.3 / [C] T sensor on HODM case.
HIERARCH ESO INS4 TEMP423 ID = 'T' / Temperature sensor ID.
HIERARCH ESO INS4 TEMP423 NAME = 'WFS external T sensor' / Temperature sensor na
HIERARCH ESO INS4 TEMP423 VAL = 15.4 / [C] T sensor on WFS camera case.
HIERARCH ESO INS4 TEMP424 ID = 'T' / Temperature sensor ID.
HIERARCH ESO INS4 TEMP424 NAME = 'ITTM T sensor' / Temperature sensor name.
HIERARCH ESO INS4 TEMP424 VAL = 14.3 / [C] T sensor on ITTM case.
HIERARCH ESO INS4 TEMP425 ID = 'T' / Temperature sensor ID.
HIERARCH ESO INS4 TEMP425 NAME = 'T on bench near IFS' / Temperature sensor name
HIERARCH ESO INS4 TEMP425 VAL = 14.8 / [C] T sensor on bench near IFS.
HIERARCH ESO INS4 TEMP426 ID = 'T' / Temperature sensor ID.
HIERARCH ESO INS4 TEMP426 NAME = 'ZIMPOL shutter T sensor' / Temperature sensor
HIERARCH ESO INS4 TEMP426 VAL = 14.6 / [C] T sensor on ZIMPOL shutter stand.
HIERARCH ESO INS4 TEMP428 ID = 'Chan' / Temperature sensor ID.
HIERARCH ESO INS4 TEMP428 NAME = 'Lakeshore Channel A' / Temperature sensor name
HIERARCH ESO INS4 TEMP428 VAL = 88.1 / [K] DTTS detector T chan. A: Detector.
HIERARCH ESO INS4 TEMP429 ID = 'Chan' / Temperature sensor ID.
HIERARCH ESO INS4 TEMP429 NAME = 'Lakeshore Channel B' / Temperature sensor name
HIERARCH ESO INS4 TEMP429 VAL = 95.72 / [K] DTTS detector T chan. B: Near detect
HIERARCH ESO INS4 TEMP430 ID = 'CT1' / Temperature sensor ID.
HIERARCH ESO INS4 TEMP430 NAME = 'T at FP1 on CFSL1' / Temperature sensor name.
HIERARCH ESO INS4 TEMP430 VAL = 19.99 / [C] T in the integrating sphere (mounted
HIERARCH ESO INS4 TEMP431 ID = 'CT2' / Temperature sensor ID.
HIERARCH ESO INS4 TEMP431 NAME = 'T on lamp table' / Temperature sensor name.
HIERARCH ESO INS4 TEMP431 VAL = 20. / [C] T on the table of the source unit.
HIERARCH ESO INS4 TEMP432 ID = 'CT3' / Temperature sensor ID.
HIERARCH ESO INS4 TEMP432 NAME = 'T QTH bulb' / Temperature sensor name.
HIERARCH ESO INS4 TEMP432 VAL = 19.99 / [C] T on the cooling duct of the Quartz-
HIERARCH ESO INS4 TEMP433 ID = 'CT4' / Temperature sensor ID.
HIERARCH ESO INS4 TEMP433 NAME = 'T signal board' / Temperature sensor name.
HIERARCH ESO INS4 TEMP433 VAL = 19.99 / [C] T inside the MISC crate.
HIERARCH ESO INS4 TEMP434 VAL = 200004. / [K] T1 DTTS - DTR .
HIERARCH ESO INS4 TEMP435 VAL = 200004. / [K] T2 DTTS - DTR2.
HIERARCH ESO INS4 TEMP436 VAL = 83.02 / [K] T3 DTTS - CPL .
HIERARCH ESO INS4 TEMP437 VAL = 275.76 / [K] T4 DTTS - EXG .
HIERARCH ESO INS4 TEMP438 VAL = 97.96 / [K] T5 DTTS - SPT .
HIERARCH ESO INS4 TEMP439 VAL = -40. / [C] T1 WFS .
HIERARCH ESO INS4 TEMP440 ID = 'CSCT' / Temperature sensor ID.
HIERARCH ESO INS4 TEMP440 NAME = 'Cabinet skin T' / Temperature sensor name.
HIERARCH ESO INS4 TEMP440 VAL = 16.38 / [C] SMALL cabinet skin T .
HIERARCH ESO INS4 TEMP441 ID = 'CSAT' / Temperature sensor ID.
HIERARCH ESO INS4 TEMP441 NAME = 'Cabinet amb. T' / Temperature sensor name.
HIERARCH ESO INS4 TEMP441 VAL = 13.67 / [C] SMALL cabinet ambient T.
HIERARCH ESO INS4 TEMP442 ID = 'CSIT' / Temperature sensor ID.
HIERARCH ESO INS4 TEMP442 NAME = 'Cabinet inlet T' / Temperature sensor name.
HIERARCH ESO INS4 TEMP442 VAL = 16.44 / [C] SMALL cabinet inlet T .
HIERARCH ESO INS4 TEMP443 ID = 'CSOT' / Temperature sensor ID.
HIERARCH ESO INS4 TEMP443 NAME = 'Cabinet outlet T' / Temperature sensor name.
HIERARCH ESO INS4 TEMP443 VAL = 13.45 / [C] SMALL cabinet outlet T .
HIERARCH ESO INS4 TEMP444 ID = 'CWCT' / Temperature sensor ID.
HIERARCH ESO INS4 TEMP444 NAME = 'Cabinet skin T' / Temperature sensor name.
HIERARCH ESO INS4 TEMP444 VAL = 20.07 / [C] WIDE cabinet skin T .
HIERARCH ESO INS4 TEMP445 ID = 'CWAT' / Temperature sensor ID.
HIERARCH ESO INS4 TEMP445 NAME = 'Cabinet amb. T' / Temperature sensor name.
HIERARCH ESO INS4 TEMP445 VAL = 13.37 / [C] WIDE cabinet ambient T.
HIERARCH ESO INS4 TEMP446 ID = 'CWIT' / Temperature sensor ID.
HIERARCH ESO INS4 TEMP446 NAME = 'Cabinet inlet T' / Temperature sensor name.
HIERARCH ESO INS4 TEMP446 VAL = 13.06 / [C] WIDE cabinet inlet T .
HIERARCH ESO INS4 TEMP447 ID = 'CWOT' / Temperature sensor ID.
HIERARCH ESO INS4 TEMP447 NAME = 'Cabinet outlet T' / Temperature sensor name.
HIERARCH ESO INS4 TEMP447 VAL = 12. / [C] WIDE cabinet outlet T.
HIERARCH ESO INS4 TEMP448 ID = 'CTCT' / Temperature sensor ID.
HIERARCH ESO INS4 TEMP448 NAME = 'Cabinet skin T' / Temperature sensor name.
HIERARCH ESO INS4 TEMP448 VAL = 14.38 / [C] TALL cabinet skin T .
HIERARCH ESO INS4 TEMP449 ID = 'CTAT' / Temperature sensor ID.
HIERARCH ESO INS4 TEMP449 NAME = 'Cabinet amb. T' / Temperature sensor name.
HIERARCH ESO INS4 TEMP449 VAL = 11.83 / [C] TALL cabinet ambient T.
HIERARCH ESO INS4 TEMP450 ID = 'CTIT' / Temperature sensor ID.
HIERARCH ESO INS4 TEMP450 NAME = 'Cabinet inlet T' / Temperature sensor name.
HIERARCH ESO INS4 TEMP450 VAL = 16.8 / [C] TALL cabinet inlet T .
HIERARCH ESO INS4 TEMP451 ID = 'CTOT' / Temperature sensor ID.
HIERARCH ESO INS4 TEMP451 NAME = 'Cabinet outlet T' / Temperature sensor name.
HIERARCH ESO INS4 TEMP451 VAL = 12.48 / [C] TALL cabinet outlet T.
HIERARCH ESO INS4 TEMP452 VAL = 10.28 / [C] T2 WFS .
HIERARCH ESO INS4 TEMP453 VAL = -40. / [C] T1 WFS set point.
HIERARCH ESO INS4 TEMP454 VAL = 83. / [K] DTTS CPL set point .
HIERARCH ESO INS4 TEMP455 ID = 'Chan' / Temperature sensor ID.
HIERARCH ESO INS4 TEMP455 NAME = 'Channel A set point' / Temperature sensor name
HIERARCH ESO INS4 TEMP455 VAL = 87. / [K] DTTS T chan. A: Detector set point.
HIERARCH ESO INS4 TILT1 ENC = 448418 / [Enc] Camera tilt absolute position.
HIERARCH ESO INS4 TILT1 FRML = 'ENC=OFFSET+RESOL*asin(2*POS-(MAX+MIN)/(MAX-MIN))'
HIERARCH ESO INS4 TILT1 OFFSET = 16325 / [Enc] Tilt reference position.
HIERARCH ESO INS4 TILT1 POS = 2. / [mm] IRDIS-IFS selector tilt1.
HIERARCH ESO INS4 TILT1 POSMAX = 153.4 / [pixel] Maximum camera tilt.
HIERARCH ESO INS4 TILT1 POSMIN = -153.4 / [pixel] Minimum camera tilt.
HIERARCH ESO INS4 TILT1 RESOL = -100. / [Enc/deg] Encoder resolution.
HIERARCH ESO INS4 TILT2 ENC = 360795 / [Enc] Camera tilt absolute position.
HIERARCH ESO INS4 TILT2 FRML = 'ENC=OFFSET+RESOL*asin(2*POS-(MAX+MIN)/(MAX-MIN))'
HIERARCH ESO INS4 TILT2 OFFSET = 16325 / [Enc] Tilt reference position.
HIERARCH ESO INS4 TILT2 POS = 1.6 / [mm] IRDIS-IFS selector tilt2.
HIERARCH ESO INS4 TILT2 POSMAX = 153.4 / [pixel] Maximum camera tilt.
HIERARCH ESO INS4 TILT2 POSMIN = -153.4 / [pixel] Minimum camera tilt.
HIERARCH ESO INS4 TILT2 RESOL = -100. / [Enc/deg] Encoder resolution.
HIERARCH ESO INS4 TILT3 ENC = 227566 / [Enc] Camera tilt absolute position.
HIERARCH ESO INS4 TILT3 FRML = 'ENC=OFFSET+RESOL*asin(2*POS-(MAX+MIN)/(MAX-MIN))'
HIERARCH ESO INS4 TILT3 OFFSET = 16325 / [Enc] Tilt reference position.
HIERARCH ESO INS4 TILT3 POS = 1. / [mm] IRDIS-IFS selector tilt3.
HIERARCH ESO INS4 TILT3 POSMAX = 153.4 / [pixel] Maximum camera tilt.
HIERARCH ESO INS4 TILT3 POSMIN = -153.4 / [pixel] Minimum camera tilt.
HIERARCH ESO INS4 TILT3 RESOL = -100. / [Enc/deg] Encoder resolution.
HIERARCH ESO DET CHIP DATE = '2010-09-27' / [YYYY-MM-DD] Date of installation
HIERARCH ESO DET CHIP ID = 'SerNum 09111-03-02' / Detector chip identificati
HIERARCH ESO DET CHIP INDEX = 2 / Chip index
HIERARCH ESO DET CHIP LIVE = T / Detector alive
HIERARCH ESO DET CHIP NAME = 'Bartoli' / Detector chip name
HIERARCH ESO DET CHIP NX = 4096 / Physical active pixels in X
HIERARCH ESO DET CHIP NY = 4102 / Physical active pixels in Y
HIERARCH ESO DET CHIP OVSCX = 50 / Physical overscan pixels in X
HIERARCH ESO DET CHIP OVSCY = 0 / Physical overscan pixels in Y
HIERARCH ESO DET CHIP PRSCX = 50 / Physical prescan pixels in X
HIERARCH ESO DET CHIP PRSCY = 0 / Physical prescan pixels in Y
HIERARCH ESO DET CHIP PSZX = 15. / [um] Size of pixel in X
HIERARCH ESO DET CHIP PSZY = 15. / [um] Size of pixel in Y
HIERARCH ESO DET CHIP RGAP = 0. / Angle of gap between chips
HIERARCH ESO DET CHIP X = 2 / X location in array
HIERARCH ESO DET CHIP XGAP = 0. / Gap after chips along x
HIERARCH ESO DET CHIP Y = 2 / Y location in array
HIERARCH ESO DET CHIP YGAP = 0. / Gap after chip along y
HIERARCH ESO DET OUT1 CONAD = 0.1 / [e-/ADU] Conversion ADUs to electr
HIERARCH ESO DET OUT1 GAIN = 10.5 / [ADU/e-] Conversion electrons to A
HIERARCH ESO DET OUT1 ID = 'L' / Output ID as from manufacturer
HIERARCH ESO DET OUT1 INDEX = 1 / Output index
HIERARCH ESO DET OUT1 NAME = 'Left' / Description of output
HIERARCH ESO DET OUT1 NX = 1024 / Valid pixels along X
HIERARCH ESO DET OUT1 NY = 2048 / Valid pixels along Y
HIERARCH ESO DET OUT1 OVSCX = 82 / Overscan region in X
HIERARCH ESO DET OUT1 OVSCY = 0 / Overscan region in Y
HIERARCH ESO DET OUT1 PRSCX = 50 / Prescan region in X
HIERARCH ESO DET OUT1 PRSCY = 0 / Prescan region in Y
HIERARCH ESO DET OUT1 RON = 20. / [e-] Readout noise per output
HIERARCH ESO DET OUT1 X = 1 / X location of output
HIERARCH ESO DET OUT1 Y = 1 / Y location of output
HIERARCH ESO DET OUT2 CONAD = 0.1 / [e-/ADU] Conversion ADUs to electr
HIERARCH ESO DET OUT2 GAIN = 10.5 / [ADU/e-] Conversion electrons to A
HIERARCH ESO DET OUT2 ID = 'R' / Output ID as from manufacturer
HIERARCH ESO DET OUT2 INDEX = 2 / Output index
HIERARCH ESO DET OUT2 NAME = 'Right' / Description of output
HIERARCH ESO DET OUT2 NX = 1024 / Valid pixels along X
HIERARCH ESO DET OUT2 NY = 2048 / Valid pixels along Y
HIERARCH ESO DET OUT2 OVSCX = 82 / Overscan region in X
HIERARCH ESO DET OUT2 OVSCY = 0 / Overscan region in Y
HIERARCH ESO DET OUT2 PRSCX = 50 / Prescan region in X
HIERARCH ESO DET OUT2 PRSCY = 0 / Prescan region in Y
HIERARCH ESO DET OUT2 RON = 20. / [e-] Readout noise per output
HIERARCH ESO DET OUT2 X = 2048 / X location of output
HIERARCH ESO DET OUT2 Y = 1 / Y location of output
HIERARCH ESO DET BINX = 2 / Setup binning factor along X
HIERARCH ESO DET BINY = 2 / Setup binning factor along Y
HIERARCH ESO DET CHIPS = 2 / Number of chips in the mosaic
HIERARCH ESO DET DEV1 BOARD1 BCKPL = '000011AA8C0E' / Serial no (backplane)
HIERARCH ESO DET DEV1 BOARD1 REV = '5.6.0' / Revision
HIERARCH ESO DET DEV1 BOARD1 SERNO = '000011AA5EB2' / Serial no (board)
HIERARCH ESO DET DEV1 BOARD1 TRANS = '00000EFB67A6' / Serial no (transition boar
HIERARCH ESO DET DEV1 BOARD1 TYPE = 'FEB' / Type
HIERARCH ESO DET DEV1 BOARD1 VERSION = 2 / Version
HIERARCH ESO DET DEV1 BOARD2 BCKPL = '000011AA8C0E' / Serial no (backplane)
HIERARCH ESO DET DEV1 BOARD2 REV = '5.6.0' / Revision
HIERARCH ESO DET DEV1 BOARD2 SERNO = '000011AA7F89' / Serial no (board)
HIERARCH ESO DET DEV1 BOARD2 TRANS = '00000EFB6DB5' / Serial no (transition boar
HIERARCH ESO DET DEV1 BOARD2 TYPE = 'FEB' / Type
HIERARCH ESO DET DEV1 BOARD2 VERSION = 2 / Version
HIERARCH ESO DET DEV1 EXP RDTTIME = 149.953 / [s] Image readout time
HIERARCH ESO DET DEV1 EXP XFERTIM = 114.324 / [s] Image transfer time
HIERARCH ESO DET DEV1 ID = 'ZIMPOL' / Detector system Id
HIERARCH ESO DET DEV1 REV = '3.1.1' / Revision
HIERARCH ESO DET DEV1 SHUT ID = 'eso-01' / Shutter unique identifier
HIERARCH ESO DET DEV1 SHUT TMCLOS = 0. / [s] Time taken to close shutter
HIERARCH ESO DET DEV1 SHUT TMOPEN = 0. / [s] Time taken to open shutter
HIERARCH ESO DET DEV1 SHUT TYPE = 'nostatus' / Shutter type
HIERARCH ESO DET DEV1 SOFW BASE = '273537' / Base software version
HIERARCH ESO DET DEV1 SOFW DETMOD = 'Not defined' / Detector module revision
HIERARCH ESO DET DEV1 SOFW MODE = 'NORMAL' / Software operational mode
HIERARCH ESO DET DEV1 SOFW OPT = '273537' / Optical software version
HIERARCH ESO DET DID = 'ESO-VLT-DIC.NGCDCS,ESO-VLT-DIC.NGCCON' / Used di
HIERARCH ESO DET DIT1 = 37. / [s] Actual subintegration time
HIERARCH ESO DET DKTM = 37. / [s] Dark current time
HIERARCH ESO DET EXP NO = 35 / Unique exposure ID number
HIERARCH ESO DET EXP TYPE = 'Normal' / Exposure type
HIERARCH ESO DET NAME = 'NGC-ZIMPOL-DCS' / Name of detector system
HIERARCH ESO DET NDIT = 4 / Number of Sub-Integrations
HIERARCH ESO DET OUTPUTS = 4 / Number of outputs
HIERARCH ESO DET READ CURID = 4 / Used readout mode id
HIERARCH ESO DET READ CURNAME = 'StandardImaging' / Used readout mode name
HIERARCH ESO DET SEQ1 EXPTIME = 148.25936 / [s] Exposure Sequence Time
HIERARCH ESO DET SEQ1 INITTIME = 0.6337136 / [s] Exposure Init Time
HIERARCH ESO DET UIT1 = 37. / [s] User defined subintegration ti
HIERARCH ESO PRO CATG = 'ZPL_SCIENCE_IMAGING_REDUCED_CAM2' / Category of pipelin
HIERARCH ESO PRO ANCESTOR = 'SPHER.2019-01-08T03:12:43.548.fits'
HIERARCH ESO PRO DID = 'PRO-1.16' / Data dictionary for PRO
HIERARCH ESO PRO TYPE = 'REDUCED' / Product type
HIERARCH ESO PRO TECH = 'IMAGE,FIELDSTAB' / Observation technique
HIERARCH ESO PRO SCIENCE = T / Scientific product if T
HIERARCH ESO PRO REC1 ID = 'sph_zpl_science_imaging' / Pipeline recipe (unique)
HIERARCH ESO PRO REC1 DRS ID = 'cpl-7.0' / Data Reduction System identifier
HIERARCH ESO PRO REC1 PIPE ID = 'spher 0.24.0' / Pipeline (unique) identifier
HIERARCH ESO PRO REC1 RAW1 NAME = 'SPHER.2019-01-08T03_12_43.548.fits' / File na
HIERARCH ESO PRO REC1 RAW1 CATG = 'ZPL_SCIENCE_IMAGING_RAW' / Category of raw fr
HIERARCH ESO PRO DATANCOM = 1 / Number of combined frames
HIERARCH ESO PRO REC1 CAL1 NAME = 'zpl_master_bias_imaging_cam1.fits' / File nam
HIERARCH ESO PRO REC1 CAL1 CATG = 'ZPL_MASTER_BIAS_IMAGING_CAM1' / Category of c
HIERARCH ESO PRO REC1 CAL1 DATAMD5 = 'f8dd83a62aba6584fdaa45be5c020404' / MD5 si
HIERARCH ESO PRO REC1 CAL2 NAME = 'zpl_master_bias_imaging_cam2.fits' / File nam
HIERARCH ESO PRO REC1 CAL2 CATG = 'ZPL_MASTER_BIAS_IMAGING_CAM2' / Category of c
HIERARCH ESO PRO REC1 CAL2 DATAMD5 = '4a9170a1a632bf5b07cff095ac304571' / MD5 si
HIERARCH ESO PRO REC1 CAL3 NAME = 'zpl_intensity_flat_imaging_cam1.fits' / File
HIERARCH ESO PRO REC1 CAL3 CATG = 'ZPL_INT_FLAT_FIELD_IMAGING_CAM1' / Category o
HIERARCH ESO PRO REC1 CAL3 DATAMD5 = 'e509452e3621c0758c521eeb0fd16db2' / MD5 si
HIERARCH ESO PRO REC1 CAL4 NAME = 'zpl_intensity_flat_imaging_cam2.fits' / File
HIERARCH ESO PRO REC1 CAL4 CATG = 'ZPL_INT_FLAT_FIELD_IMAGING_CAM2' / Category o
HIERARCH ESO PRO REC1 CAL4 DATAMD5 = '4918dc57c70e2e710e9f9430551d638f' / MD5 si
HIERARCH ESO PRO REC1 PARAM1 NAME = 'zpl.science_imaging.outfilename' / The outp
HIERARCH ESO PRO REC1 PARAM1 VALUE = 'zpl_science_imaging.fits' / Default: 'zpl_
HIERARCH ESO PRO REC1 PARAM2 NAME = 'zpl.science_imaging.outfilename_cam1' / The
HIERARCH ESO PRO REC1 PARAM2 VALUE = 'zpl_science_imaging_cam1.fits' / Default:
HIERARCH ESO PRO REC1 PARAM3 NAME = 'zpl.science_imaging.outfilename_cam2' / The
HIERARCH ESO PRO REC1 PARAM3 VALUE = 'zpl_science_imaging_cam2.fits' / Default:
HIERARCH ESO PRO REC1 PARAM4 NAME = 'zpl.science_p1.subtract_overscan' / Flag to
HIERARCH ESO PRO REC1 PARAM4 VALUE = 'true' / Default: true
HIERARCH ESO PRO REC1 PARAM5 NAME = 'zpl.science_imaging.coll_alg' / Set the col
HIERARCH ESO PRO REC1 PARAM5 VALUE = '0' / Default: 0
HIERARCH ESO PRO REC1 PARAM6 NAME = 'zpl.science_imaging.filter_radius' / Filter
HIERARCH ESO PRO REC1 PARAM6 VALUE = '0' / Default: 0
HIERARCH ESO PRO REC1 PARAM7 NAME = 'zpl.science_imaging.keep_intermediate' / Fl
HIERARCH ESO PRO REC1 PARAM7 VALUE = 'false' / Default: false
HIERARCH ESO PRO REC1 PARAM8 NAME = 'zpl.science_imaging.save_interprod' / Flag
HIERARCH ESO PRO REC1 PARAM8 VALUE = 'false' / Default: false
HIERARCH ESO PRO REC1 PARAM9 NAME = 'zpl.science_imaging.star_center_iframe' / F
HIERARCH ESO PRO REC1 PARAM9 VALUE = 'true' / Default: true
HIERARCH ESO PRO REC1 PARAM10 NAME = 'zpl.science_imaging.center_xoffset_cam1'
HIERARCH ESO PRO REC1 PARAM10 VALUE = '0' / Default: 0
HIERARCH ESO PRO REC1 PARAM11 NAME = 'zpl.science_imaging.center_yoffset_cam1'
HIERARCH ESO PRO REC1 PARAM11 VALUE = '0' / Default: 0
HIERARCH ESO PRO REC1 PARAM12 NAME = 'zpl.science_imaging.center_xoffset_cam2'
HIERARCH ESO PRO REC1 PARAM12 VALUE = '0' / Default: 0
HIERARCH ESO PRO REC1 PARAM13 NAME = 'zpl.science_imaging.center_yoffset_cam2'
HIERARCH ESO PRO REC1 PARAM13 VALUE = '0' / Default: 0
HIERARCH ESO PRO REC1 PARAM14 NAME = 'zpl.preproc.outfilename_cam1' / The postfi
HIERARCH ESO PRO REC1 PARAM14 VALUE = 'preproc_cam1.fits' / Default: 'preproc_ca
HIERARCH ESO PRO REC1 PARAM15 NAME = 'zpl.preproc.outfilename_cam2' / The postfi
HIERARCH ESO PRO REC1 PARAM15 VALUE = 'preproc_cam2.fits' / Default: 'preproc_ca
HIERARCH ESO DRS PC PROD TYPE = 'SPH PC DOUBLE IMAGE'
HIERARCH ESO QC DOUBLE IMAGE IFRAME MEAN = 7.2786097984803
HIERARCH ESO QC DOUBLE IMAGE IFRAME MEDIAN = 1.43251432355438
HIERARCH ESO QC DOUBLE IMAGE IFRAME RMS = 32.7309432414817
HIERARCH ESO QC DOUBLE IMAGE PFRAME MEAN = 0.432694665740833
HIERARCH ESO QC DOUBLE IMAGE PFRAME MEDIAN = 0.283511323376903
HIERARCH ESO QC DOUBLE IMAGE PFRAME RMS = 1.29229731945966
HIERARCH ESO QC DOUBLE IMAGE ODD-I NUMBER BADPIXELS = 0
HIERARCH ESO QC DOUBLE IMAGE EVEN-P NUMBER BADPIXELS = 0
HIERARCH ESO DRS COMPONENT NAME = 'SPHERE Pipeline'
HIERARCH ESO DRS COMPONENT VERSION = '0.19.0'
HIERARCH ESO DRS COMPONENT REVISION = '3287'
HIERARCH ESO DRS COMPONENT DISTDATE = '2016-10-17T00:01:50+0200'
HIERARCH ESO ADA ABSROT END = 2.31929 / [deg] Abs rot angle at exp end
HIERARCH ESO ADA ABSROT PPOS = 'NEG' / sign of probe position
HIERARCH ESO ADA ABSROT START = 1.37365 / [deg] Abs rot angle at exp start
HIERARCH ESO ADA GUID DEC = 15.2863 / [deg] 15:17:10.6 Guide star DEC J2000
HIERARCH ESO ADA GUID RA = 116.420484 / [deg] 07:45:40.9 Guide star RA J2000
HIERARCH ESO ADA GUID STATUS = 'ON' / Status of autoguider
HIERARCH ESO ADA POSANG = 0. / [deg] Position angle at start
HIERARCH ESO AOS GARBCOL MODE = 'ON' / SPARTA Garbage Collection
HIERARCH ESO AOS HOCTR MODE = 'LEAKY' / SPARTA high-order controller mode
HIERARCH ESO AOS HOLOOP STATE = 'CLOSED_LOOP' / State of Visible High Order Loop
HIERARCH ESO AOS IRLOOP STATE = 'OPEN_LOOP' / State of IR Differential Tip Tilt
HIERARCH ESO AOS IROPTIM WEIGTMOD = 'STATIC' / SPARTA IR Optimised Weighting M
HIERARCH ESO AOS IRWFS MODE = 'DTTS2' / SPARTA Infrared WFS detector mode
HIERARCH ESO AOS OPTIMTT KALMAN = 'TURB_ONLY' / SPARTA Image Tip Tilt Optimised
HIERARCH ESO AOS OPTMODAL GAIN = 'ON' / SPARTA Optimised Modal Gain
HIERARCH ESO AOS PUPLOOP STATE = 'CLOSED_LOOP' / State of Pupil Loop
HIERARCH ESO AOS SLAVING MODE = 'DYNAMIC' / SPARTA current slaving mode
HIERARCH ESO AOS TTLOOP STATE = 'CLOSED_LOOP' / State of Image Tip Tilt Loop
HIERARCH ESO AOS VISOPTIM WEIGTMAP = 'STATIC' / SPARTA Visible WFS Optimised W
HIERARCH ESO AOS VISWFS MODE = 'GAIN_1000_FREQ_600Hz' / SPARTA Visible WFS detec
HIERARCH ESO OCS DET1 IMGNAME = 'SPHERE_ZIMPOL_OBS' / Data File Name.
HIERARCH ESO OCS OBSTYPE LIST = 'O' / User defined list of observ. types
HIERARCH ESO OCS WAFFLE AMPL = 0.05 / User defined waffle amplitude
HIERARCH ESO OCS WAFFLE ORIENT = '+' / User defined waffle orientation
HIERARCH ESO OCS3 ZIMPOL FIELD POS = 'O0' / SOS hierarchical Keyword
HIERARCH ESO OCS3 ZIMPOL FIELD POSANG = 0. / SOS hierarchical Keyword
HIERARCH ESO OCS3 ZIMPOL SHUTTER = F / SOS hierarchical Keyword
HIERARCH ESO SEQ ARM = 'ZIMPOL' / Name of the sub-system.
HIERARCH ESO SEQ CORO CPI_ND = 'OPEN' / ND filter used in the centring proc.
HIERARCH ESO SEQ CORO DATE = '2019-01-07T16:36:56' / Date and time of centring.
HIERARCH ESO SEQ CORO XC = 255.631 / Coronagraph position at the end of centring
HIERARCH ESO SEQ CORO YC = 258.042 / Coronagraph position at the end of centring
COMMENT FITS (Flexible Image Transport System) format is defined in 'Astronomy
COMMENT and Astrophysics', volume 376, page 359; bibcode: 2001A&A...376..359H
CHECKSUM = 'AP3RCM0RAM0RAM0R' / HDU checksum updated 2019-05-09T12:29:41
DATASUM = '1041036443' / data unit checksum updated 2019-05-09T12:29:41