VizieR

CfA VizieR . ADAC VizieR . Cambridge (UK) VizieR . IUCAA VizieR . INASAN VizieR .

VizieR

Simple TargetList Of TargetsFast Xmatch with large catalogs or Simbad
Target Name (resolved by Sesame) or Position:
Target dimension:
NB: The epoch used for the query is the original epoch of the table(s)Radius Box size

  
J/ApJ/850/83
  DANCING-ALMA. I. submm/mm continuum sources (Fujimoto+, 2017)
Post annotation
img(gal)
1.J/ApJ/850/83/table4(c)5σ-peak catalog (ALL5S) (1034 rows)
2.J/ApJ/850/83/table2ALMA maps (1627 rows)

 
Query by Constraints constraints help applied on Columns (Output Order: + - )
ShowSortJoin tables
more join
Column  Constraint Explain   (UCD)
  (ALL)recno  Record number assigned by the VizieR team. Should Not be used for identification. (meta.record)
  (1)Seq   [1/1034] Source ID of ALL5S (meta.id;meta.main)
  (1)RAJ2000 deg (i) Right Ascension, decimal degrees (J2000) (pos.eq.ra;meta.main)
  (1)DEJ2000 deg (i) Declination, decimal degrees (J2000) (pos.eq.dec;meta.main)
   (ALL)lambda mm [0.8/19.2] Observed wavelength (em.wl)
  (1)SNpeak   [5/69] Peak signal-to-noise ratio (stat.snr;stat.max)
  (1)Speak mJy/beam [0.08/10.2] Peak flux density per beam obtained from the peak pixel value before primary beam correction (phot.flux.density;em.mm.200-400GHz)
  (1)e_Speak mJy (n) [0.01/1.1] Standard deviation of the pixel values before primary beam correction, corresponding to the uncertainty of the peak pixel values (stat.error)
  (1)Simf mJy (n) [0.06/30.4] Total flux density measured by IMFIT after primary beam correction (phot.flux.density;em.mm.200-400GHz)
  (1)e_Simf mJy (n) [0.01/1.1] Uncertainty in Simf (Note 1)   (stat.error)
  (1)Suvf mJy (n) [0.05/35] Total flux density measured by UVMULTIFIT after primary beam correction for ALL10S (phot.flux.density;em.mm.200-400GHz)

ALL cols
    
(n) indicates a possible blank or NULL column(i)indexed column
  (1)e_Suvf mJy (n) [0.01/425] Uncertainty in Suvf (Note 2)   (stat.error)
  (1)Suvfcrr mJy (n) [0.05/27] Total flux density measured by UVMULTIFIT after primary beam Monte-Carlo simulation (Section 3.3) corrections for ALL10S (Note 2)   (phot.flux.density;em.mm.200-400GHz)
  (1)e_Suvfcrr mJy (n) [0.01/483] Uncertainty in Suvfcrr (Note 2)   (stat.error)
  (1)Ruvf arcsec (n) [0.04/0.9] Effective Radius measured by UVMULTIFIT for ALL10S (Note 2)   (phys.angSize)
  (1)e_Ruvf arcsec (n) [0/133] Uncertainty in Ruvf (Note 2)   (stat.error)
  (1)Ruvfcrr arcsec (n) [0.01/0.9] Effective Radius measured by UVMULTIFIT after Monte-Carlo simulation correction (Section 3.3) for ALL10S (Note 2)   (arith.factor;phys.angSize)
  (1)e_Ruvfcrr arcsec (n) [0/111] Uncertainty in Ruvfcrr (Note 2)   (stat.error)
  (1)f_uvf  (n) Reliability of UVMULTIFIT result (0=reliable) (2) (Note 3)   (meta.code)
  (1)offset arcsec (n) [0.01/1] Offset between centers of the ALMA source and the optical-NIR counterpart for OC5S (Note 4)   (meta.id.assoc;pos.angDistance)
  (1)zphot  (n) [0.01/10] Photometric redshift of the optical-NIR counterpart obtained from the optical-NIR source catalog for OC5S (Note 4)   (src.redshift)
  (1)Hmag mag (n) [1.4/28.3] H-band AB magnitude for OC5S (Note 4)   (phot.mag;em.IR.H)
  (1)COSMOS  (n)Display COSMOS data (II/284 and Ilbert+, 2013, J/A+A/556/A55) within 0.3" (meta.ref.url)
  (2)MID   [1/1627] Map ID (meta.id;obs.field)

ALL cols
    
(n) indicates a possible blank or NULL column(i)indexed column
  (2)PrID (char) ALMA project code ID (meta.id;obs)
  (2)Target (char) Target name in the initial ALMA observations (meta.id;phys.atmol.initial;obs)
  (2)nu GHz [221/354] Frequency in the observed frame (em.freq)
  (2)Band   [6/7] ALMA Band (meta.code;instr.filter)
  (2)Min m [15/43] Minimum baseline of the antenna configuration (instr.baseline)
  (2)Max m [134/2270] Maximum baseline of the antenna configuration (instr.baseline)
  (2)sigma mJy/beam [0.01/1.4] One sigma noise level measured after the CLEAN process (Section 2.2) (instr.det.noise)
  (2)amaj arcsec [0.1/4.1] Major axis of the synthesized beam (weight = 'natural') (phys.angSize;instr.beam)
  (2)bmin arcsec [0.1/1.3] Minor axis of the synthesized beam (weight = 'natural') (phys.angSize;instr.beam)
  (2)Beam arcsec [0.1/2.1] Circularized beam size (phys.angSize;instr.beam)
  (2)sSet (char) Classification of the sub-dataset (Note 1)   (meta.id)
  (2)Type   [1/2] map type: 1=single field; 2=mosaic (Note 2)   (meta.code)

ALL cols
    
(n) indicates a possible blank or NULL column(i)indexed column
Adapt form
Display your selection only Reset to default columns
usage  Display UCD1+    UCD1  
elapse time 0